Lemorau EBRM+

Lemorau EBRMis an affordable table top digital finishing machine that can coat, die cut, slit and rewind digital printed webs. Due to an electronic feeder roll, the machine can be used as in-line finishing machine together with digital press or as offline finishing machine. The EBRM+ die cutting unit can run in full and semi-rotary modes. The web tension is electronically controlled and due to the machine mechanical shafts no air is required.

  • Maximum rotary speed 80 m/min. (262.4 ft/min.) – Die cutting to register
  • Maximum semi-rotary speed 25 m/min (82 ft/min.) dependent on plate size – Die cutting to register
  • Web width 250, 330 mm  (10, 13″)
  • Electronic labels and meters counter
  • 250 Job memory for easy and quick job set ups
  • Automatic web tension control
  • Electronic sensors to start, stop, move faster and move slower while working in line
  • Multi language HMI touch screen
  • QRC (Quick Remote Connection)- For fast and easy access to the machine remotely
  • Electrical supply according to country/customer request (no need of transformers)
  • CE conformity certificated, user manual and electrical scheme


  • Mechanical shaft ID 76mm (3”)
  • Max. diameter 450mm (18″)
  • Clockwise/counterclockwise unwinding
  • Electronic web guide system with ultrasonic sensor which enables guiding of opaque and clear materials
  • Splice table


  • 01 Linerless lamination unwinder mechanical shaft
  • Max. diameter 300mm (12”)
  • Lamination shaft ID 76mm (3″)


  • Operates in full Rotary and Semi-rotary modes with lateral adjustment
  • Equipped with magnetic cylinder  Z130 1/8”
  • Die repeats in rotary mode:  203,20 – 412,75 mm (8 – 16.25″)
  • Recommended die repeat in semi-rotary mode (Z130): 82,55- 330,20 mm (3,25 – 13″)
  • Servo driven buffer
  • Waste rewinder with mechanical shaft ID 76mm
  • Waste max. diameter 450mm (18”)


  • Equipped with 6 sets of circular knives with lateral adjustment – Can be added more as optional


  • 01 rewinder mechanical shaft with max. diameter 360mm (14”)
  • Shaft ID 76mm (3”) – minimum ID possible to use is 40mm (1.57”)
  • Colockwise and counterclockwise rewinding
  • Additional slitting knives
  • Clear on clear sensor
  • In feed tension system to work inline w/ flatbed, semi-rotary and screen machines
  • Pneumatic air shafts
  • Work bench

Click to Order Spare Parts or for Technical Assistance