Lemorau CRL
Lemorau CRL is a finishing machine that can be used in-line with a semi-rotary or flatbed printing machine. The web goes trough a buffer box with electronic sensors that allows a perfect synchronism between both machines. Due to the vacuum table and guide systems the web is tensioned and stripped. The slitting knives provide a clean and precise cut and the air trim removal system does an excellent job removing the edges. Servo motors allow a perfect rewinding in both rewinders and waste rewinder
STANDARD FEATURES
- Maximum speed 100 m/min. (328,08 ft/min.)
- Web width 250, 330, 400 mm (10, 13, 16″)
- Electronic Counter (Labels/ Meters/ Rolls counter/ Total meters and labels Counter)
- Automatic web tension control system by servo motors – Constant and Taper tension
- 250 Job memory for easy and quick job set ups
- 6 sets of circular knives with lateral adjustment
- 2 interchangeable pneumatic rewinders – comes with 6 shafts (2×25, 2×40, 2×76 mm) (2×1″, 2×1.5″, 2×3″)
- Paper and matrix break detection
- Labels in/ labels out rewinding
- Max. rewinder diameter: 450 mm (18″) for 1 shaft / 350 mm (14″) for 2 shafts
- Max. waste rewinder diameter: 450mm (18″)
- Air trim removal
- Vacuum table
- Buffer box with electronic sensors
- Remote assistance through internet connection
- Semi- Automatic rewinding
- Multi language touch screen
- CE conformity certificated, user manual and electrical scheme
OPTIONAL EQUIPMENT
- Additional mandrels in customized sizes
- Additional slitting knives
- Clear on clear sensor
- Right to left configuration
- QRC (Quick Remote Connection)
- Razor slitting knives
