Lemorau Digi LC

Lemorau Digi LC is an entry level water based digital printing machine that work in-line with EBRM+. Based on Memjet Technology, Digi LC can print with resolution 1600×1600 dpi full color. Due to the printing head cleaning function, the high printing quality is maintained during long runs. Digi LC die cutting unit runs in rotary and semi-rotary mode.

  • Maximum rotary speed 25 m/min (82 ft/min) or up to 80m/min (262.4 ft/min) w/ unwinder (optional) to work offline
  • Maximum semi-rotary speed 25 m/min (82 ft/min.) dependent on plate size – Die cutting to register when offline
  • Web width 250 mm (10 in)  Finishing section can also be 330 mm (13 in)
  • Print Resolution 1600×800 or 1600×1600 dpi
  • Print speed 18m/min or 9m/min (59 ft/min or 30 ft/min)
  • Print width 222,8 mm (8,77 in) length 2400 mm (94.5 in)
  • Ink system – NIAGARA INK
  • 2 Liter ink tanks of each color (CMYK)
  • 1 unwinder mechanical shaft with max. diameter 500mm (19.7 in)
  • Electronic labels and meters counter
  • Web guide with splice table
  • Variable web tension control (automatic on unwinder, rewinder and waste rewinder)
  • 6 sets of circular knives with lateral adjustment
  • 1 rewinder mechanical shaft with max. diameter 360mm (14 in)
  • 1 waste rewinder mechanical shaft with max. diameter 450mm (18 in)
  • 1 linerless lamination unwinder mechanical shaft with max. diameter 300mm (12 in)
  • Labels in/labels out rewinding
  • Die cutting unit in register with rotary/semi-rotary modes and lateral adjustment
  • Standard gears for magnetic cylinders are 1/8 CP, straight teeth, angle 20 degrees
  • Semi-rotary magnetic cylinder Z130
  • Die repeats in Rotary mode: 203,20 – 412,75 mm (8 – 16.25 in)
  • Recommended die repeat in Semi-rotary mode (130z):  82,55- 330,20 mm (3,25 – 13 in)
  • Paper and matrix break detection
  • Electronic sensors to start, stop, move faster and move slower
  • Color touch screen with multi language function
  • Remote assistance through internet connection
  • Work bench
  • CE conformity certificated, user manual and electrical scheme
  • Additional mandrels in customized sizes
  • Additional slitting knives
  • Anvil roll with adjustable gap
  • Clear on clear sensor
  • Double rewinding
  • Pneumatic air shafts
  • Pressure gauges for die cutting unit
  • QRC (Quick Remote Connection)
  • Razor slitting knives
  • Software for calculation of total cost of labels
  • Software RIP from Trojan
  • Unwinder for off line mode

Click to Order Spare Parts or for Technical Assistance