Lemorau Digi EBR+

Lemorau Digi EBR is a digital printing machine that can coat and die cut all in one process. Based on SIRIUS MEMJET Technology, the Digi EBR+ can print with resolution 1600×1600 dpi full color. Due to the printing head cleaning function, the high printing quality is maintained during long runs. The Digi EBR+ runs in rotary and semi-rotary mode and can finish digital printed webs provided from others digital printing machines as well.  High production of white labels at max. speed 200 m/min.

  • Maximum rotary speed 200 m/min (656 ft/min.) – Blank labels
  • Maximum rotary speed 120 m/min (394 ft/min.) – Die cutting to register
  • Maximum semi-rotary speed 40 m/min (131 ft/min.) dependent on plate size – Die cutting to register
  • Web width 250, 330, 400, 450 mm (10, 13, 16, 18”) For the finishing section
  • Print resolution 1600×800 or 1600×1600 dpi
  • Print speed 18 m/min or 9 m/min (59 ft/min or 30 ft/min)
  • Print width 222,8 mm (8,77″) 
  • Ink system – NIAGARA INK
  • Four 2-liter ink tanks (CMYK)
  • Electronic Counter (Labels/ Meters/ Rolls counter/ Total meters and labels Counter)
  • Adjustable splice table with pneumatic clamps
  • Electronic web guide system with ultrasonic sensor which enables guiding of opaque and clear materials
  • Automatic web tension control system by servo motors – Constant and Taper tension
  • 250 Job memory for easy and quick job set ups
  • 6 sets of circular knives with lateral adjustment
  • 2 interchangeable pneumatic rewinders – comes with 6 shafts (2×25, 2×40, 2×76 mm) (2×1″, 2×1.5″, 2×3″)
  • Paper and matrix break detection
  • Labels in/ labels out rewinding
  • Remote assistance through internet connection
  • Automatic stop at master roll end with programmable end of roll function
  • Semi- Automatic rewinding
  • Foot pedal to jog the machine
  • Multi language touch screen
  • Standard gears for magnetic cylinders are 1/8 CP, straight teeth, angle 20 degrees
  • Die cutting unit equiped with magnetic cylinder Z130 1/8”
  • Die repeat in Rotary mode: 203,20 – 412,75 mm (8 – 16.25″)
  • Recommended die repeat in semi-rotary mode (Z130):  82,55- 330,20 mm (3,25 – 13″)
  • Maximum unwinder diameter 700 mm (27,5″)
  • Maximum rewinder diameter 600 mm (23,7″) for 1 shaft / 350 mm (13,8″) for 2 shafts
  • CE conformity certificated, user manual and electrical scheme
  • Additional mandrels in customized sizes
  • Additional rotary die station
  • Additional slitting knives
  • Air trim removal
  • Anti-static bar
  • Anvil roll with adjustable gap
  • Automatic positioning of slitting knives 
  • Back scorer unit
  • Booklet label module
  • Cast’n’cure
  • Clear on clear sensor
  • Cold foil
  • Conveyor
  • Corona treatment
  • Custom made die cutting unit according to existing cylinders
  • Delam/Relam
  • Easy strip waste rewinder
  • Flat bed screen printing
  • Hot foil flat bed
  • Inkjet module for variable data
  • Lamination station (Linerless/ with liner)
  • Laser cut
  • Modular 1m (3.3 ft) unwinder diameter
  • Multi layer labels
  • Pressure gauges for die cutting unit
  • QRC (Quick Remote Connection)
  • Razor slitting knives
  • RFID insertion
  • Rotary/semi-rotary UV Flexo module
  • Rotary screen printing
  • Speed Pack Semi-rotary die cut up to 80m/min
  • Turn bar
  • Turret rewinding
  • Web cleaner

Click to Order Spare Parts or for Technical Assistance